| View previous topic :: View next topic |
| Author |
Message |
fordp301
magicJack Apprentice
Joined: 08 Apr 2008
Posts: 14
|
 Posted: Tue Jun 30, 2009 9:54 am Post subject: ATA Start Working with following setting |
 |
|
this is not my work, it was written by az1324
you need to download this MJMD5, which can be found in this thread
After download Extract to Desktop then open it only thing you need to change is your proxy address if you using boston then just xxxx to boston of any other city then put your MJ proxy password in password line then mark on save setting and start service
You would setup your ATA the same way you did normally in the past for MJ but instead of the proxy address and port you would put the ip address of your computer running the proxy like (if your computer proxy is 192.168.1.103 then on proxy setting put 192.168.1.103:5070) and the Listen Port. On the proxy itself you would put the proxy address that you normally would have put in the ATA, the Forward Port (5070), and also your MJ password.
I am Using this and its working good
your computer need to be up and running to make it work. |
|
| Back to top |
|
 |
Google
AdSense
|
| Posted: Tue Jun 30, 2009 9:54 am Post subject: Magicjack support, tips, tricks, and hacks |
|
|
|
|
| Back to top |
|
|
zixy_tris
MagicJack User
Joined: 16 Jun 2008
Posts: 32
|
| Posted: Tue Jun 30, 2009 11:08 am Post subject: |
|
|
Will give it at try? Is there a possibility I can run this on just one computer and run all my atas or will I have to use different computer for different atas.
I have like 5-6 ATA's and some are international where I do not have option to run a computer full time as proxy. Is there a possibility I can send them to computer running in US?? |
|
| Back to top |
|
|
alphabeta
magicJack Apprentice
Joined: 02 Apr 2008
Posts: 15
|
| Posted: Tue Jun 30, 2009 11:28 am Post subject: Re: ATA Start Working with following setting |
|
|
| fordp301 wrote: | this is not my work, it was written by az1324
you need to download this MJMD5, which can be found in this thread. |
Seems 1st step towards the goal to use MJ without the need to run PC all the time.
Thanks.. |
|
| Back to top |
|
|
teddy_b
MagicJack Contributor
Joined: 30 Dec 2007
Posts: 55
|
| Posted: Tue Jun 30, 2009 12:10 pm Post subject: |
|
|
| zixy_tris wrote: | | Is there a possibility I can send them to computer running in US?? |
Although this is theoretically possible, the proxy provided (which is, by the way, came from this thread) is not secured, and if exposed to the internet, everybody in the whole world will be able to connect to it and make calls using the MJ account it's setup with. All they need to know is your MJ phone number (which can be obtained by sniffing the traffic, for example).
To prevent this you'll have to provide your own security measures, i.e. filter clients connecting by IP addresses, or require VPN connection, etc... |
|
| Back to top |
|
|
xboxuser1
MagicJack User
Joined: 26 Feb 2008
Posts: 39
|
| Posted: Tue Jun 30, 2009 3:24 pm Post subject: Re: ATA Start Working with following setting |
|
|
| fordp301 wrote: | this is not my work, it was written by az1324
you need to download this MJMD5, which can be found in this thread
After download Extract to Desktop then open it only thing you need to change is your proxy address if you using boston then just xxxx to boston of any other city then put your MJ proxy password in password line then mark on save setting and start service
You would setup your ATA the same way you did normally in the past for MJ but instead of the proxy address and port you would put the ip address of your computer running the proxy like (if your computer proxy is 192.168.1.103 then on proxy setting put 192.168.1.103:5070) and the Listen Port. On the proxy itself you would put the proxy address that you normally would have put in the ATA, the Forward Port (5070), and also your MJ password.
I am Using this and its working good
your computer need to be up and running to make it work. |
Sound good! ... is it possible to give a screen shot of the ata setting to be sure all the setting are good....
Thanks for this info! |
|
| Back to top |
|
|
mel2000
MagicJack Contributor
Joined: 31 May 2009
Posts: 67
|
| Posted: Tue Jun 30, 2009 4:16 pm Post subject: Re: ATA Start Working with following setting |
|
|
| alphabeta wrote: | | Seems 1st step towards the goal to use MJ without the need to run PC all the time. |
I get the impression that keeping your computer turned on is still required. |
|
| Back to top |
|
|
doctorman
MagicJack Contributor
Joined: 03 Feb 2009
Posts: 53
|
| Posted: Tue Jun 30, 2009 6:50 pm Post subject: Re: ATA Start Working with following setting |
|
|
| mel2000 wrote: | | alphabeta wrote: | | Seems 1st step towards the goal to use MJ without the need to run PC all the time. |
I get the impression that keeping your computer turned on is still required. |
this is very useless
please put it in the subject that you need a computer running still... |
|
| Back to top |
|
|
newtoncd
Dan isn't smart enough to hire me
Joined: 08 Jan 2009
Posts: 216
|
| Posted: Tue Jun 30, 2009 7:05 pm Post subject: Re: ATA Start Working with following setting |
|
|
| fordp301 wrote: | this is not my work, it was written by az1324
you need to download this MJMD5, which can be found in this thread
After download Extract to Desktop then open it only thing you need to change is your proxy address if you using boston then just xxxx to boston of any other city then put your MJ proxy password in password line then mark on save setting and start service
You would setup your ATA the same way you did normally in the past for MJ but instead of the proxy address and port you would put the ip address of your computer running the proxy like (if your computer proxy is 192.168.1.103 then on proxy setting put 192.168.1.103:5070) and the Listen Port. On the proxy itself you would put the proxy address that you normally would have put in the ATA, the Forward Port (5070), and also your MJ password.
I am Using this and its working good
your computer need to be up and running to make it work. |
I would like to set this up with my thin client and my Linksys ATA. But, the MJMD5 program won't run on my thin client. To the person that wrote the program, can you fix it to run on a thin client? I get an error "application failed to initialize properly 0xc0000135. Click OK to terminate".
Any idea?
Edit: looks like I need to install .net framework, which apparently doesn't do well on a thin client ... more to follow.
_________________
-Curt
--magicJack user since Oct 08 w/magicFeatures
--D-Link DIR-655
-NetTalk DUO since Dec 10
Last edited by newtoncd on Tue Jun 30, 2009 7:28 pm; edited 1 time in total |
|
| Back to top |
|
|
doctorman
MagicJack Contributor
Joined: 03 Feb 2009
Posts: 53
|
| Posted: Tue Jun 30, 2009 7:08 pm Post subject: Re: ATA Start Working with following setting |
|
|
| newtoncd wrote: | | fordp301 wrote: | this is not my work, it was written by az1324
you need to download this MJMD5, which can be found in this thread
After download Extract to Desktop then open it only thing you need to change is your proxy address if you using boston then just xxxx to boston of any other city then put your MJ proxy password in password line then mark on save setting and start service
You would setup your ATA the same way you did normally in the past for MJ but instead of the proxy address and port you would put the ip address of your computer running the proxy like (if your computer proxy is 192.168.1.103 then on proxy setting put 192.168.1.103:5070) and the Listen Port. On the proxy itself you would put the proxy address that you normally would have put in the ATA, the Forward Port (5070), and also your MJ password.
I am Using this and its working good
your computer need to be up and running to make it work. |
I would like to set this up with my thin client and my Linksys ATA. But, the MJMD5 program won't run on my thin client. To the person that wrote the program, can you fix it to run on a thin client? I get an error "application failed to initialize properly 0xc0000135. Click OK to terminate".
Any idea? |
non of my business but why the hell use ata with TC at the same time
you have extra money?
just use the TC. |
|
| Back to top |
|
|
oldtimercurt
Dan isn't smart enough to hire me
Joined: 07 Feb 2009
Posts: 280
Location: Pensacola
|
| Posted: Tue Jun 30, 2009 7:12 pm Post subject: |
|
|
doctorman
One possibility, though I haven't tried it yet, is that the call quality used to be considered to be better on the ATA. That's why I'm looking into it.
OTC |
|
| Back to top |
|
|
newtoncd
Dan isn't smart enough to hire me
Joined: 08 Jan 2009
Posts: 216
|
| Posted: Tue Jun 30, 2009 7:29 pm Post subject: Re: ATA Start Working with following setting |
|
|
| doctorman wrote: | non of my business but why the hell use ata with TC at the same time you have extra money?
just use the TC. |
I am desperately trying to get rid of the dreaded beep. It is driving us crazy... and to be honest, I love playing around technology stuff.
_________________
-Curt
--magicJack user since Oct 08 w/magicFeatures
--D-Link DIR-655
-NetTalk DUO since Dec 10 |
|
| Back to top |
|
|
fordp301
magicJack Apprentice
Joined: 08 Apr 2008
Posts: 14
|
| Posted: Tue Jun 30, 2009 7:45 pm Post subject: Re: ATA Start Working with following setting |
|
|
| Quote: | "application failed to initialize properly 0xc0000135. Click OK to terminate".
Any idea?
Edit: looks like I need to install .net framework, which apparently doesn't do well on a thin client ... more to follow. |
I found this update Hope its help you download and install this
| Code: | | http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=1809592&prodNameId=1809593&swEnvOID=1058&swLang=13&mode=2&taskId=135&swItem=vc-66762-1 |
[/code] |
|
| Back to top |
|
|
craigm1
MagicJack User
Joined: 18 Jun 2008
Posts: 43
|
| Posted: Tue Jun 30, 2009 8:28 pm Post subject: this works |
|
|
You need to keep a computer on but the sound quality on my pap2 is so much better, tried using 2 lines on one computer have 2 mj's but wouldn't work is this possible?? have 2 computers running the software so now I have 2 mj's on my pap2.
Christmas has come in June!!!!
Craig |
|
| Back to top |
|
|
oldtimercurt
Dan isn't smart enough to hire me
Joined: 07 Feb 2009
Posts: 280
Location: Pensacola
|
|
| Back to top |
|
|
newtoncd
Dan isn't smart enough to hire me
Joined: 08 Jan 2009
Posts: 216
|
| Posted: Tue Jun 30, 2009 9:01 pm Post subject: Re: ATA Start Working with following setting |
|
|
| fordp301 wrote: | | Quote: | "application failed to initialize properly 0xc0000135. Click OK to terminate".
Any idea?
Edit: looks like I need to install .net framework, which apparently doesn't do well on a thin client ... more to follow. |
I found this update Hope its help you download and install this
| Code: | | http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=1809592&prodNameId=1809593&swEnvOID=1058&swLang=13&mode=2&taskId=135&swItem=vc-66762-1 |
[/code] |
I got 1.1 installed and the program requires 2.0. Your link is for 2.0; good find, appreciate it. Unfortunately, my flash drive has only 61MB free (64MB capacity) and it requires the full flash drive to be empty to install. I will play around with it and see if I can get it to install.
_________________
-Curt
--magicJack user since Oct 08 w/magicFeatures
--D-Link DIR-655
-NetTalk DUO since Dec 10 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
