magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

mpwebster · MagicJack Newbie Joined: 26 Aug 2008 Posts: 8

check this site. i dont believe that mega will fit and have room for jffs memory. i would use mini build. hope this helps. http://www.dd-wrt.com/wiki/index.php/Supported_Devices

Google · AdSense

cucu007 · magicJack Apprentice Joined: 02 Dec 2008 Posts: 14

I got the setup ready on the asus router, now I am trying to get the PAP2V2 working, I can't seem to get it connected. Can someone help. I know my PAP2v2 is unlocked, but I am not sure if it is working with this setup.

crackerjack · Dan Should Pay Me Joined: 16 Nov 2007 Posts: 726

Zeeble · MagicJack Newbie Joined: 05 Dec 2009 Posts: 3

Seems this forum has died out quite a bit. I recently purchased a MJ and a pap2t-na. I have a Linksys WRT54g v8 running the current release (11/25/09) Eko DD-WRT Micro-Plus_ssh.

Here is my problem. I can ssh into the router and wget the mjproxy and set the permissions to it in ram (/tmp) however everytime i go to execute it, it fails to start.

/tmp/mjproxy 0.0.0.0 5070 proxy01.stlouis.talk4free.com 5070 PASSWORD
/tmp/mjproxy: can't resolve symbol 'htons'

My linux isn't great, but it isn't horrible either. So what is this supposed to mean? Work arounds? I've followed everything to a T and still nothing. I googled the 'htons' error and received only limited responses. The interesting information I found was a guy was trying to do it on a WRT54GS v7 (aka the same as the WRT54G v8) and that the router just cannot do it due to the revision number. Just a shot in the dark to hopefully get a reply that touches on this issue.

huntergreenAR15 · magicJack Apprentice Joined: 08 Jul 2009 Posts: 10

I had the exact same problem with my Linksys wrt54g V5. No room for Jffs. I bought an ASUS and as you can see from previous posts it works like a charmand in little or not time at all. I'm no fan boy of ASUS I'm just very pleased with this particular router. Even out of the box it was mile ahead of my linksys. It was $10 more and about 4 years later so to be honest it should have been miles ahead.

jsherk · MagicJack Expert Joined: 08 Dec 2009 Posts: 79

Not sure this article would be any help to anybody:
http://www.0xdecafbad.com/?p=140

boar · MagicJack Newbie Joined: 18 Dec 2009 Posts: 8

jack2009 · MagicJack Newbie Joined: 05 Dec 2009 Posts: 2

Hi to all in the forum and Happy New Year.

I have one problem with this version of mjproxy for my dd-wrt device. I run the regular version for my Debian computer and my SPA-1001, connect correctly. I received and make call fine, but when I tried to use this version for my Linksys Router, my SPA-1001 has problem, sometime it register but only receive call and sometime it fail in the registry process and never connect. I tried this mjproxy in two Linksys router (Diferent Model) and the same problem. Any idea?

Thanks

Guide_timothy · magicJack Apprentice Joined: 15 Dec 2008 Posts: 21

I found that its usually the STUN server configuration in your ATA device that stopps it from connecting go to your stun config and enter this server its what i currently use
STUN server IP 217.10.79.2
STUN server port 10000

Another tip is to go inside ur router and open port 5070

Hope these 2 tips help Very Happy

jack2009 · MagicJack Newbie Joined: 05 Dec 2009 Posts: 2

Thanks, for the tips.

MST · magicJack Apprentice Joined: 02 Nov 2009 Posts: 28

Hello all

It looks like this thred has died. Just curiasity: is it still working?

I am trying te get WRT54G v4 to work with MJ proxy but no luck

And can't use PF2.1 any more ......
_________________
MST

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

I am attempting to follow directions to load MJproxy on my wrt54g-tm, and in Putty I am getting login incorrect. I am positive I have the correct credentials for the router, but it gives me login incorrect. I am newbie and have no idea how to proceed.

Any help would be appreciated.

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

I am using Linksys WRT54G-TM and using Tomato 1.27. I have run into a prolem on step number 7. I entered "chmod mjproxy to 755" (no quotes) and it says it can not be found. I am at a loss here, because I have no knowledge of programming linux. It appears that the mjproxy is not loading in router.

Also it says to Telnet, but doesn't show clicking telnet. I thought telnet used port 23. I am stumped at this level. Any help from here would be appreciated.

Thanks,

Mike

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

sorry, wrong sticky.

Strych9 · MagicJack Newbie Joined: 29 Apr 2009 Posts: 5

New MagicJack User-Agent String for your SIP info:

MagicJack/1.90.521b (SJ Labs)

--on an ASUS WL520GU using DD-WRT and mjproxy in JFFS.