magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

grillovillegas · magicJack Apprentice Joined: 11 May 2009 Posts: 25

Since DDWRT works runs on Linux and support OPKG
could you give me ideas how to run the proccess on the router ?
_________________
Grillo Villegas

Google · AdSense

peterlemonjello · magicJack Apprentice Joined: 09 Sep 2008 Posts: 12

Ahh, interesting concept

Taken83oveR · Posted: Wed Jul 01, 2009 3:35 pm Post subject:

I 2nd this idea. Lots of people here with DD-WRT routers, and would much rather run it on there, instead of leaving there pc's on (kinda defeats the purpose).

grillovillegas · magicJack Apprentice Joined: 11 May 2009 Posts: 25

No one Linux Geek ???

To include the program on the DDWRT ???
_________________
Grillo Villegas

desidude2000 · MagicJack User Joined: 22 Sep 2008 Posts: 36

i posted a similiar request. instead of running it on the dd-wrt router, i could run it on my buffalo linkstation (arm9 based linux os). but looks like the code is written in .NET.

brghouston · MagicJack Newbie Joined: 01 Jul 2009 Posts: 1

I would love it to work for DD-WRT or even through a network cable

az1324 · Posted: Wed Jul 01, 2009 6:19 pm Post subject:

Read the certificate thread someone already posted a binary for mips routers.

grillovillegas · magicJack Apprentice Joined: 11 May 2009 Posts: 25

Taken83oveR · Posted: Thu Jul 02, 2009 3:32 pm Post subject:

OK I got it up and running on my DD-WRT router. Here are the brief instructions. I am doing this from memory, so I may of screwed up the directions. This is more of a guideline and not a step by step. Please forgive me, as this is not really for newbs. For those wondering I am doing this on a Netgear WNR834B v2 running DD-WRT version 12307.

You may need to enable JFFS2 in the admin page. Some people may not, Depends on the router I guess. You can check to see if your router is supported by looking for the option here. (Administration Tab)
http://192.168.1.1/Management.asp
Why you are there, make sure telnet is enabled.

1: http://www.mediafire.com/?ky3kndgwnei
Visit the above page, you will need to copy the actual download link. Right click on "Click here to start download.." and copy the link location. It should look similar to this once copied.
http://download736.mediafire.com/ny9njfy3mjdg/ky3kndgwnei/mjproxy_mipsel.ipk (do not use this link, it will not work.)
Make sure you copy the link like I explained, as you will need it in step 3.

2: You will need putty, so download it if you do not have it.
http://www.chiark.greenend.org.uk/~sgtatham/putty/
Telnet into your router via putty and login with your username/password (root/admin for many people)

3: Next we will install mjproxy via the following command. Make sure your http link is correct.

Poo619 · MagicJack Expert Joined: 20 Nov 2007 Posts: 96

cant get it to ipkg install. The link is dynamic and appears to change each time. I get the correct info type it in and it still fails. Any other way you can think of to install it?

Taken83oveR · Posted: Thu Jul 02, 2009 4:39 pm Post subject:

That's why I gave you the original link. Visit here.
http://www.mediafire.com/?ky3kndgwnei
Right click on "Click here to start download.." and copy the link location. The 2nd time I did it, it was http://download736.mediafire.com/wnu394lmetzg/ky3kndgwnei/mjproxy_mipsel.ipk
But I am sure it will be different for you.

pagemen · Posted: Thu Jul 02, 2009 5:15 pm Post subject:

so looks like the openwrt binary will work on DD-WRT?

to make things easier, here is the direct link(the zip extension is to get around the limitation of the free hosting service)

***for ipk****
wget http://pagemen.110mb.com/mjproxy_mipsel.ipk.zip -O mjproxy_mipsel.ipk

***for binary***
wget http://pagemen.110mb.com/mjproxy.zip -O mjproxy
chmod a+x mjproxy

The binary should be sufficient.

dskum · magicJack Apprentice Joined: 08 Feb 2009 Posts: 11

If you have DD-WRT router. Open your router by typing its IP in your browser

1, Goto 'Administration' Tab
2, Enable JFFS2

3. Save & Apply settings
4. Use a telnet program and login to your router (One is available in WinXP through 'Accessories -> Communications -> HyperTerminal)
5. User name will be 'root', password if your DD-WRT password

Type the following commands:

1. wget http://pagemen.110mb.com/mjproxy_mipsel.ipk.zip -O mjproxy_mipsel.ipk
2. ipkg install mjproxy_mipsel.ipk
3. mjproxy 0.0.0.0 5070 proxy01.xxxxxxxx.talk4free.com 5070 YOUR_PASSWORD

I tested using x-Lite and it connected. I made a test call and it works. (I didnt test incoming since all incoming are redirected to my mobile). The IP address in the x-lite is my router address, which is usually used for connecting to DD-WRT.

Looks promising...Going to test with ATA. Finally MJ working again without computer!!! Also testing to start the service when router reboots. (which anyhow rarely happens)

Thanks goes to Taken83oveR & pagemen for getting this moving.

Poo619 · MagicJack Expert Joined: 20 Nov 2007 Posts: 96

Thanks for the easy to follow instructions guys but I am still hitting the wall. dskum following your instructions left me with error messages.

Taken83oveR · Posted: Thu Jul 02, 2009 6:56 pm Post subject:

That is a pretty old build. You may look into upgrading dd-wrt to a newer build. You are running 10011 vs my 12307 (a pre sp2 build). But did you try doing as it suggested?

Run "ipkg update".