magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

robatino · MagicJack Expert Joined: 29 Aug 2008 Posts: 97

My PAP2T isn't registering any more. I had to recreate the dongleless setup on one of my machines, it required my MJ username and password. The first time after that I tried, the ATA didn't work. I don't know if that's the cause, but at least we know it's not selective for heavy users now. My SIP info is the same as before so it's not that either. Both the dongle and all dongleless setups continue to work normally.

It's not a big deal since I can continue to use Dukadial as before, and if necessary eventually sign up with another cheap SIP service such as Future Nine.

Google · AdSense

vMAC · magicJack Apprentice Joined: 28 May 2009 Posts: 14

I've just went in and configured everything but it's telling me Can't connect to login server on the Summary page? Does anyone know what I might have missed?

madhaterm · MagicJack Newbie Joined: 06 Jul 2009 Posts: 2

I fellow the instruction exactly on setting up my Linksys PAP2T Adapter. It works great but I have a question that wasn't addressed unless I missed it but how do you access your voice mail from a phone?

any help or direction would be great. Thanks.

oldtimercurt · Posted: Mon Jul 06, 2009 4:09 pm Post subject: Rip Van Winkle

Deleted
OTC

craigm1 · MagicJack User Joined: 18 Jun 2008 Posts: 43

Hit Start and run and type cmd into the dos prompt, then hit ipconfig /all

the ip has to be on the money of the computer your have mjmd5 on and make sure your password is correct on both your ata and the computer running mjmd5 also the port has to be at the end of the ip
say 192.16.0.1:5070 for the proxy address this is what tripped me up but I have 4 lines now going on 2 pap2!!!!

hope this helps

craig

newtoncd

madhaterm · MagicJack Newbie Joined: 06 Jul 2009 Posts: 2

Thanks

dionicio · Posted: Fri Jul 10, 2009 1:13 pm Post subject: Re: help

you can put a pic?
I dont see the side to put it

running mjmd5 also the port has to be at the end of the ip
say 192.16.0.1:5070 for the proxy address this is what tripped me up but I have 4 lines now going on 2 pap2!!!!

hope this helps

craig[/quote]

joefly · MagicJack Newbie Joined: 02 Sep 2009 Posts: 5

HI guys, I have PAP2 firmware 3.1.15 and MJ just bought an updated. I have tried all the configuration listed and I keep getting "Can't connect to login server"

Just want to confirm that the listed setup is still working for people as I have read that MJ is blocking such setup. Please confirm to get this to work I do not need to config my router or need any PC to overide the dongle.

And if it does work, what specif settings should I be focusing on to change to overcome this error of not connecting to the login server.

Thanks

haack · MagicJack Newbie Joined: 17 Feb 2009 Posts: 9

i have the credentials and i put the info on my pap2 as shown in the pictures , now how i make it work? i get can not connect =(
also run mjmd with this info is that OK??? maybe the proble is setting that!!!
listen port 5070
forward port 5070
proxy proxy01.LosAngeles.talk4free.com
password (the one i get on password finder2.2)
is that ok??
please any help will be great!!!!

stav · Posted: Thu Sep 24, 2009 8:49 pm Post subject: Re: PAP2 not working with MJ

stav · Posted: Thu Sep 24, 2009 8:49 pm Post subject: Re: help

newtoncd · Posted: Thu Sep 24, 2009 9:07 pm Post subject: Re: PAP2 not working with MJ

sunny786 · magicJack Apprentice Joined: 22 Sep 2008 Posts: 29

proxy proxy01.LosAngeles.talk4free.com:5070 <<<---------- you were missing in this line :5070

joefly · MagicJack Newbie Joined: 02 Sep 2009 Posts: 5