magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

stav · Posted: Tue Oct 06, 2009 1:41 am Post subject:

Go in the dd-wrt site and choose your model number, in the case of 54g v2.0 you would see the recommended build. Into there choose the mini, it contains all you need to run MJMD5. There should also be a tutorial on how to flash the router, I found mine here http://www.scorpiontek.com/portal/ look for an article written by shawn. In there you will also find the route back to the linksys firmware.
You are right in saying that there is always a risk to brick you router. It happened to me one time and to other people much more knowledgeable than myself. But hey, no guts no glory ... Smile

)

Google · AdSense

choi3388 · Posted: Thu Oct 29, 2009 11:59 pm Post subject:

I have a Linksys PAP2T which was discontinued from iConnect because of getting MJ services now. Do I still need to flask my U.S. Robotics wireless MAXg Router and then install mjproxy in it?
_________________
OLD MAN

stav · Posted: Fri Oct 30, 2009 3:47 am Post subject:

You need to find out if your wireless router is supported by DD-Wrt. Not sure where to find this info now, been out of this forum for couple of months. Go browse this forum and you will find out by yourself I'm sure. If not supported by ddwrt, then you probably need a compatible router like the linksys v1 to 4.

Brenbro2 · Posted: Fri Oct 30, 2009 8:35 am Post subject:

Just for your info. my PAP2T w/MJ works just fine on a D-Link DIR 300 router and on a Linksys BEFSR41 router without installing MJMD5 or DD WRT. I don't say that it will work on any other, but so for I have had no problems with these 2 routers (actually 3 because I have used 2 different DIR 300's) at 2 different locations/networks.

Getting a D-Link DIR 650 next week, will post if I have any problems.
_________________
Bruce Brenner
Living in the beautiful Philippines

choi3388 · Posted: Fri Oct 30, 2009 9:03 pm Post subject:

I've my MJ SIP. But can't find info to unlock my used Linksys PAP2T.
_________________
OLD MAN

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

Can someone post the pics of settings. I have all of my equipment Pap2t-NA and using MJproxy. I have sip password and ID. I just need to see which settings everyone is using ie....proxy.

Thanks,

Mike

PEARLTONE · MagicJack Newbie Joined: 03 Jan 2010 Posts: 2

can someone explain to me what you guys are doing with the lynks pap2 voip??? and MJ
i had read somewhere that this no longer works due to firmware change from MJ ???
i do have an unlocked pap2 just do not know if this works anymore
please confirm

thanks

shiz504 · MagicJack Newbie Joined: 04 Jan 2010 Posts: 1

hi everyone,
I got my pap2 up and working.. only problem I'm seeing is every so often when I receive a call right when i pickup it makes a fax noise.. is anyone else having this problem?

thx

Moe_Ale · Posted: Sun Feb 07, 2010 4:48 pm Post subject: PAP2T not working yet

crackerjack · Dan Should Pay Me Joined: 16 Nov 2007 Posts: 726

Are you using mjmd5 proxy fix?

Have you tried with a simple softphone like express talk from NCH?

make sure your sip credentials are valid and work using softphone. If not, implement mjmd5 in windows. Make sure your sip details work with softphone before trying the more complex pap2 implementation.

Based on the vintage of your mj hardware you may/may not need mjmd5.

Good luck

Crackerjack
_________________
Good Luck

CrackerJack

MagicJack Customer #73
MagicJack user since May 2007
MagicJack abuser since June 2007
"I gots mo' numbers than a Lotto machine!!!"

Moe_Ale · Posted: Sun Feb 07, 2010 7:22 pm Post subject:

I think the router part is done as what I did below:
Result:
BusyBox v1.13.4 (2009-10-10 01:26:36 CEST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

root@DD-WRT:~# mkdir /jffs/mjp/
root@DD-WRT:~# cd /jffs/mjp/
root@DD-WRT:/jffs/mjp# wget http://pagemen.110mb.com/mjproxy_mipsel.ipk.zip -O m
jproxy_mipsel.ipk
Connecting to pagemen.110mb.com (70.38.113.158:80)
mjproxy_mipsel.ipk 100% |*******************************| 5819 --:--:-- ETA
root@DD-WRT:/jffs/mjp# ipkg -d /jffs/mjp/ install mjproxy_mipsel.ipk
Unpacking mjproxy...Done.
Configuring mjproxy...Done.
root@DD-WRT:/jffs/mjp# mjproxy 0.0.0.0 5070 proxy01.detroit.talk4free.com 5070 my mjpassword
root@DD-WRT:/jffs/mjp#

Moe_Ale · Posted: Mon Feb 08, 2010 10:37 am Post subject: Re: PAP2T not working yet

nulland · Posted: Thu Feb 11, 2010 10:09 am Post subject:

@Moe_Ale

Use the following settings in your PAP2:

Line 1

Hope this helps.

Moe_Ale · Posted: Thu Feb 11, 2010 10:23 am Post subject:

datim1952 · Posted: Tue Mar 23, 2010 4:10 pm Post subject: MagicJack Password

I have a Linksys PAP2T ATA adapter and an ASUS RT-N13U router that I am trying to connect with a MagicJack.
I have been able to set everything except the password.
I have tried pmdump, Fiddler2, textpad, Hex Editor and still have not been able to retrieve the password.
Can anyone give me some direction on how to proceed?
Thanks in advance.