magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

paksarhad · MagicJack Newbie Joined: 14 Apr 2010 Posts: 1

hi guys

i have pap2-eu and i need help to setup mj on it

i got my userid and 20 character pass extracted using dump method.

i just need help to setup my pap2-EU device. please help

Google · AdSense

crackerjack · Dan Should Pay Me Joined: 16 Nov 2007 Posts: 726

pedroradio · MagicJack Newbie Joined: 21 Apr 2008 Posts: 4

I have followed all instruction read in this forum.. and only get to call out and nuthing reaceived from upside.: I using my PAP2 setup folown the intruction i read in this forum..behind my router dd-wrt micro so i use this code: sleep 30
cd /tmp/
wget http://pagemen.110mb.com/mjproxy_mipsel.ipk.zip -O mjproxy_mipsel.ipk
ipkg -d /tmp/ install mjproxy_mipsel.ipk
/tmp/bin/mjproxy 0.0.0.0 5070 proxy01.xxxxxxxx.talk4free.com 5070 MY_PASSWORD

my linksys pap2 info said: Registration State: Online

my home phone has good tone , and i can call any number, with good communication ' but.. when i try to call to my MJ ..fail .nuthing respond. any sound , any error or feed back.

Everton · MagicJack Contributor Joined: 28 Jan 2010 Posts: 69

pedroradio · MagicJack Newbie Joined: 21 Apr 2008 Posts: 4

pedroradio · MagicJack Newbie Joined: 21 Apr 2008 Posts: 4

thanks Everton . I m a noob in this field. i alrady fowarded follow this post :
www.no-ip.com/support/guides/routers/dynamic-dns-on-dd-wrt.html

well I change the port # ..this is how looks like:
Linksys with DD-WRTv24-sp2 (07/22/09) micro

Port Forward
Application Port From Protocol Ip Address Port to Enable

Magicjack 5070 Both 192.168.1.191 5070 V

*sip 5070 TCP 192.168.1.191 5070 V

sip 5070 UDP 192.168.1.191 5070 V

my PAP2T has the same setting follow the intructive pics guide at this post :http://www.magicjacksupport.com/magicjack-in-a-pap2t-configuration-pics-t5066.html..

. right now I can make call. but no received..

I will apreciate you any help.

thanks

Yoshikor · MagicJack Newbie Joined: 11 Apr 2010 Posts: 3

have setup the magicjack with the PAP2 ATA and followed the settings provided by MagicDump. I get a dial tone but get a busy tone whenever I dial any number. Also I have this error msg "can't connect to login server"
can anyone help

mastdesi · MagicJack Contributor Joined: 05 Feb 2010 Posts: 70

monkeysez · MagicJack Newbie Joined: 21 Aug 2009 Posts: 3

As posted previously in this post, replace 1311 with 1514. That should work.

Novice · MagicJack Newbie Joined: 05 Aug 2010 Posts: 4

I thank MagicDump, mberlant and everyone else for contributing your knowledge to this forum. After seeing the clear instructions and screenshots posted by MagicDump, I was encourage to try configuring my Grandstream HT-502 ATA using the same steps. However, after trying a few times I realized that Grandstream HT-502 configuration screens are quite different from Linksys.

Can someone help / guide me by showing me the steps for configuring the Grandstream ATA? Any help would be greatly appreciated!

twdy · MagicJack Newbie Joined: 10 Mar 2008 Posts: 7

Novice · MagicJack Newbie Joined: 05 Aug 2010 Posts: 4

Hi twdy,

I greatly appreciate your reply to my post. Can you please clarify, "Change your SIP Server based on lowest ping and shortest path of the proxy servers"?

Also, other than the 5 settings that you mentioned in your reply, should I retain all the remaining default setting of my Grandstream HT-502?

Lastly, I found out that my MJ is using proxy1.Dallas.talk4free.com but my voice quality is rotten most times. Would changing the proxy to proxy1.NewYork.talk4free.com solve the problem?

Thanks a ton for all the help!

mastdesi · MagicJack Contributor Joined: 05 Feb 2010 Posts: 70

yes changing servers does make a difference. New york servers had some problem so i changed to another one and its perfect now.

go to run type "cmd" enter it. then type "ping (server name here without the brackets)" and enter.
_________________
Check out www.free-cricket.com & www.free-arena.com

Novice · MagicJack Newbie Joined: 05 Aug 2010 Posts: 4

I greatly appreciate the information Mastdesi! It has helped me understand which proxy I should use. However, I still do not know what all I have to change in the default config. of my Grandstream HT-502 ATA other than the following info I got from twdy:

SIP Server:proxy1.NewYork.talk4free.com
Outbound Proxy: 192.168.1.1:5070
SIP User ID: EXXXXXXXXXXXX
Authenticated ID: EXXXXXXXXXXXX
SIP Registration: Yes

I want to someone to confirm if this only is enough; if not then what else should be configured? I don't want MJ guys to detect that I am using an ATA and they block my service!

Thanks so much for your help!!

mastdesi · MagicJack Contributor Joined: 05 Feb 2010 Posts: 70

everything seems good but i have this " SIP Server: 192.168.1.1:5070 " so i can just change the server from the mjproxy. just run the mjproxy on your computer with the port 5070 open and everything should work fine.

i left my spa2102 as defualt also in the start then i changed some stuff like the dialplan .

Also i dont think they will find out if your using ata if u make a mistake in your configuration. Dont think, Just Do It. lol. go for it, its all testing.
_________________
Check out www.free-cricket.com & www.free-arena.com