magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

craigm1 · MagicJack User Joined: 18 Jun 2008 Posts: 43

When the phone rings it stutters can I make any adjustments to the settings to fix this??

Craig

Google · AdSense

craigm1 · MagicJack User Joined: 18 Jun 2008 Posts: 43

My phone stutters the connection isnt clear when the phone is ringing or if im on a phone call its constantly cuts in and out on the call any adjustments i should be looking at??

craig

Smee · magicJack Apprentice Joined: 02 May 2009 Posts: 25

craigm1 · MagicJack User Joined: 18 Jun 2008 Posts: 43

changed wave form still does it.

help!!!!!!!

craig

Smee · magicJack Apprentice Joined: 02 May 2009 Posts: 25

craigm1 · MagicJack User Joined: 18 Jun 2008 Posts: 43

have a cable modem and 4 lingo lines on the same connection as 2 majic jack lines with pap2, just tried one of mj lines with nothing else running and it sound perfect, I know with some of the carriers voip i have had there are setting on there website to lower bandwith requirements is there a way to do this directly in pap2??

craig

ruff202 · MagicJack Newbie Joined: 29 May 2009 Posts: 2

craigm1 · MagicJack User Joined: 18 Jun 2008 Posts: 43

my sound is a little choppy when using multiple magic jack lines I saw someone on here say they configured the outbound proxy and it fixed it how would i conifgure this and is there a way to make the bandwith use of a pap2 lower for use with multiple lines

Thanks in advanced

craig

robatino · MagicJack Expert Joined: 29 Aug 2008 Posts: 97

The PAP2TMJ.config file in the OP should be edited to replace

1.80.466c -> 1.80.484a (in two places)

and

proxy1 -> proxy01

Do people still have trouble with these changes applied, assuming one gets the new SIP password (if it's changed)?

mjsbz · magicJack Apprentice Joined: 09 May 2008 Posts: 16

I'm using the recommended settings we've discussed here. But I still have the same problem. Incoming Works. Outgoing does NOT.

How many people have incoming & outgoing successfully up?

robatino · MagicJack Expert Joined: 29 Aug 2008 Posts: 97

mjsbz · magicJack Apprentice Joined: 09 May 2008 Posts: 16

I'm using the new and updated User Agent: MagicJack/1.80.484a (SJ Labs) Another note, I'm actually using the SPA-2100 so I'm not using the config file uploaded here.

robatino · MagicJack Expert Joined: 29 Aug 2008 Posts: 97

I just tested the PAP2T with the new settings and it works for both outgoing and incoming. My circumstances are unusual - I had done a clean install of Windows just before the upgrade, so the first time I plugged in the dongle, it did the upgrade in a clean environment. I got the SIP info which turned out to be the same as before the upgrade, and made the above edits to my config file and applied it before letting the PAP2T register. I also make extremely limited use of MJ - most of my calls use Dukadial to avoid worrying about the TOS, and the MJ is for unusual/emergency situations. I wouldn't expect incoming calls to be deliberately blocked, since Dan makes money off those. Maybe the restrictions are being applied selectively to people who use a lot of outgoing minutes?

mjsbz · magicJack Apprentice Joined: 09 May 2008 Posts: 16

Very strange. I've gone through these configs for a while, I'm not seeing any differences. Can't imagine why a pap2t would work, and a SPA-2100 wouldn't. I must be missing something stupid. But, I'm still reading quite a bit of people with the no outgoing issue.

robatino · MagicJack Expert Joined: 29 Aug 2008 Posts: 97