magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

macman4hire · Last edited by macman4hire on Sat May 16, 2009 2:14 am; edited 4 times in total

This is an RTP300 configuration for the MagicJack with screen shots. I would like to thank MagicDump for his PAP2 configuration example that I consulted. I also would like to thank mberlant for his dialing plan that was used in this set up. Last but not least stroths for his MagicJack Utilities Suite v1.6 to pull your SIP credentials from your MagicJack. I hope it helps all the forum members that own Linksys RTP300 and wish to use with their MagicJack.

stroths's MagicJack Utilities Suite v1.6 http://rapidshare.com/files/181629789/MagicJack_Utilities_v1.6.zip

MagicDump's PAP2 configuration file http://rapidshare.com/files/208210096/PAP2TMJ.config use this to copy and pasted any of the fields you can not completely see in screen shots.

mbarlent's dial plan

Google · AdSense

wirelessrat · magicJack Apprentice Joined: 09 May 2009 Posts: 10

Ditto

macman4hire · Posted: Sun May 10, 2009 9:33 pm Post subject: Hope this helps!

Hope this helps wirelessrat.

911pcdoc · magicJack Apprentice Joined: 12 May 2009 Posts: 20

ok did i miss part there i have a rtp300 and want to set it up to replace the silver dongal!! where do i find the info for my account and then what to i do with tis file yes i am new so not to much flameing please!

oldtimercurt · Posted: Wed May 13, 2009 6:17 am Post subject: Stroths Magic wand

911pcdoc

http://www.magicjacksupport.com/stroths-mj-utilities-suite-1-6-sip-grabber-upgrader-more-t4230.html will help with your MJ info.

http://www.magicjacksupport.com/magicjack-in-a-pap2t-configuration-pics-t5066.html will help with setup.

OTC

911pcdoc · magicJack Apprentice Joined: 12 May 2009 Posts: 20

thank you for that info i am gonna be trying to configure my old rtp300 from (another provider)i have reflashed and is wide open now i will let you all know how it turns out!

911pcdoc · magicJack Apprentice Joined: 12 May 2009 Posts: 20

ok i got i most of it! i have a dial tone and it seems to be up but when i dial i get a rapid busy???? on any number please help!

macman4hire · Posted: Thu May 14, 2009 11:14 am Post subject:

1.You want to try lowering the Register Expires: setting which is listed under the either Line 1 or 2 depending on which line you choose to configure your MagicJack under. Set the Register Expires: to 60 and see if that corrects the problem.

2.Check you dialing plan. Did use mberlant's dialing if so replace the 311 with your local area code. Also try the complete 11 digit telephone number to place a call.

911pcdoc · magicJack Apprentice Joined: 12 May 2009 Posts: 20

actually i got it going i used different dialing rules! to fix it thanks now seems like the delay after dialing is too long like 10 to 15 sec before it starts to ring???? is there a setting for this??? sorry but yes i am new! to this but i am vary vary glad that its not on the pc or that silver thing!! anymore!

macman4hire · Posted: Thu May 14, 2009 11:25 am Post subject:

Good deal! Just remember to never run your ATA and the USB Magic Jack dongle at the same time. This could get your service terminated.

911pcdoc · magicJack Apprentice Joined: 12 May 2009 Posts: 20

yea thats kinda obvious but you know some peps might try it lol!! you just you all just made me love my magic jack all over again!!!!

911pcdoc · magicJack Apprentice Joined: 12 May 2009 Posts: 20

only problem now this delay on dial out is not good! any advice?
also all inbound calls are going stright to vm?? Please help!
it seems that somewhere i missed something i see on the onfo screen call back active: NO ??? PLEASE I NEED HELP!

macman4hire · Posted: Thu May 14, 2009 1:19 pm Post subject:

Did you lower the Register Expires: value to 60?
Did switch to mberlant's dial plan?

mberlant's dial plan below

911pcdoc · magicJack Apprentice Joined: 12 May 2009 Posts: 20

ok i have set it to 60 and switched to the dial plan and edited the area code! seems better there but i can get calls AWWWW

Hook State: On Registration State: Registered
Last Registration At: 5/14/2009 14:28:55 Next Registration In: 30 s
Message Waiting: No Call Back Active: No[/u][/i]

911pcdoc · magicJack Apprentice Joined: 12 May 2009 Posts: 20

ok here it is i have it all working 100% or so it seems looks like my crappy router as not routing correctly so no calls were coming i have it all working now!!! thank you all so much for the help here and i will try to help those out that need help here as well! this was an easier project then i thought at first! as i said love this magic jack agine!!