magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

stav · Posted: Tue Sep 22, 2009 9:43 am Post subject:

I'm following all steps as outlined earlier and successfully installed mjproxy in my wrt54g v.2 flashed with dd-wrt v24-sp1 mini(07-27-0 Cool

. I telnet into the router and mjproxy runs fine.
I still cannot register into MJ server using the PAP2T but ... can register with X-Lite with same credentials.!
Any ideas on what's going on here? All suggestions welcome.
Thanks
PS. have a pre-april 09 MJ

Google · AdSense

Cablespider · magicJack Apprentice Joined: 27 May 2009 Posts: 28

Do you have the proxy on the PAP2T pointing to the router?

stav · Posted: Wed Sep 23, 2009 2:37 pm Post subject:

Thanks for still being around, Smile

)
I point to the proxy01.yourtown.talk4free.com 5070 your password.
Actually when I telnet into the router and type "top" in the command prompt to see if mjproxy is running, I get

root@DD-WRT:~# top
-sh: top: not found.

There is not enough free space for jffs in my wrt54gv8.2 and so I give these commands in the router's command line:

sleep 30
cd /tmp/
wget http://pagemen.110mb.com/mjproxy_mipsel.ipk.zip -O mjproxy_mipsel.ipk
ipkg -d /tmp/ install mjproxy_mipsel.ipk
/tmp/bin/mjproxy 0.0.0.0 5070 proxy01.urtown.talk4free.com 5070 my pw.

I get no error messages when I run the commands, so assume all is OK, but obviousely its not.
Any help welcome,
Thx

Cablespider · magicJack Apprentice Joined: 27 May 2009 Posts: 28

Now point your PAP2T to the router. Let's say your router IP is 192.168.1.1...you would set the proxy on the PAP2T to 192.168.1.1:5070

In other words, don't use the MJ proxy address (proxy01.yourtown.talk4free.com) on the PAP2T. You use the the IP of the router. If you have it set up this way, then I'm lost.

stav · Posted: Wed Sep 23, 2009 8:32 pm Post subject:

It works now,
I flashed my old 54G v.2 with dd-wrt strd with all bells and whistles including JFFS. Loaded mjproxy as per instructions in this thread, checked it and it runs. Pointed my ATA to my router's IP instead of the proxy01.mytown.talk4free.com and it works like a charm.
Thanks Cablespider for the hint and all the contributors in this thread for the setup.

Cablespider · magicJack Apprentice Joined: 27 May 2009 Posts: 28

Good job. I'm glad you got it working.

grillovillegas · magicJack Apprentice Joined: 11 May 2009 Posts: 25

Hi

i am having a problem MJ is runing in my pap2
without any MJMD5 for over a couple of months
without a problem...

But i need to setup it as a trunk on my asterisk server
any ideas

Thanks
_________________
Grillo Villegas

webtechy · MagicJack Newbie Joined: 02 Feb 2008 Posts: 3

Checking the database here:
http://www.dd-wrt.com/dd-wrtv3/dd-wrt/hardware.html

and then reflashing to the v24 SP1 mini, i was able to get everything working

Thanks dskum, Taken83oveR & pagemen!

bluett · MagicJack Newbie Joined: 18 Oct 2009 Posts: 2

I keep getting this with mjproxy. Any ideas?

fala · magicJack Apprentice Joined: 28 Mar 2009 Posts: 20

bluett · MagicJack Newbie Joined: 18 Oct 2009 Posts: 2

Never mind my last post...my password was wrong. This works perfectly on my DD-WRT router and SPA942!!!

baiano · MagicJack Newbie Joined: 16 Oct 2009 Posts: 2

Cant get it running.

My setup is this:

Linksys with Firmware: DD-WRT v24 (05/24/0 Cool

micro (no space for JIFFS)
Sipura SPA2102

So I have the internet coming from the cable modem to the Linksys, where I had the commands added to the startup as :

sleep 30
wget http://pagemen.110mb.com/mjproxy.zip -O /tmp/mjproxy
chmod a+x /tmp/mjproxy
/tmp/mjproxy 0.0.0.0 5070 proxy01.atlanta.talk4free.com 5070 MJPWD

I saved this for startup but since I could not register I tried to run the commands and got the error message:

sh: eval: line 5: /tmp/mjproxy: not found

My ATA (Sipura) is pointing to the router IP 192.168.1.143.

What am I doing wrong?

Thanks!!!!!

nulland · Posted: Fri Oct 23, 2009 9:41 am Post subject:

Commands are correct, but maybe mjproxy is not being unzipped. File mjproxy.zip is downloaded but unzipped so mjproxy cannot be found. DD-WRT V24 may not have the gunzip command in it bin directory. Try a newer build of DDWRT micro, like R12548.

yazyazoo · MagicJack User Joined: 04 Aug 2009 Posts: 36

I just got a MagicJack and have DD-WRT sp2 std running on a Buffalo WHR-G125. I was able to install this onto my router.

I now am trying to cofigure the ATA portion of the setup.

I am looking at this thread and it seems to difficult. I can't even see some of the things people are changing. Is all of this needed?

http://www.magicjacksupport.com/magicjack-in-a-pap2t-configuration-pics-t5066.html

gavilaso · magicJack Apprentice Joined: 06 Jan 2009 Posts: 29

Hi all from Puerto Rico. Today i when on and buy a Linksys PAP2T and i'm waiting for it to come from HK. so until i wait i was try to get my router WRT-300N V1.1 DD-WRT v24-sp2 (10/10/09) mega - build 13064 setup with the MJMD5 but i'm not able to, i don't know if the code that are here doesn't work for this build of dd-wrt or if i'm doing something wrong... i have all the problem that everyone is posting in here but i'm not able to fix them.. i have read the 24 page in this post but with out any luck.. can anyone give me a hand! Thanks