magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

Google · AdSense

degarb · MagicJack Expert Joined: 04 Aug 2008 Posts: 92

degarb · MagicJack Expert Joined: 04 Aug 2008 Posts: 92

http://www.supershareware.com/get/free/soft-phone.html
A ton of free phones here.

Any one with any time to test until they find one that works with google voice out and can be controlled with phone without need of touching the computer?

doohickey · MagicJack User Joined: 08 Jul 2009 Posts: 41

GVOut isn't working so well for me anymore. It will successfully initiate one call and that's it.

I use the dial plan method on port 5060. I've tried both with and without the busy signal, same result.

The first time I noticed this behavior was this past week when there seemed to be some changes with GV/G5 causing one-way audio. I began using GV/sipgate until I could sort out the GV/G5 problem. Sipgate worked flawlessly right off the bat except for some caller ID issues and a slightly longer audio delay (long enough to make calls somewhat painful and bolster my determination in getting GV/G5 working again.) It's during the use of sipgate that I noticed the GVOut one call problem, but I blew it off because I assumed it may be isolated to sipgate, and besides, I had bigger fish to fry.

I have since fixed the GV/G5 one-way audio issue, but the GVOut one call problem has persisted. I them assumed the GVOut problem may be due to the NAT setting changes made in the SPA3102 which were required to fix the GV/G5 issue. But, while GVOut only makes one call then craps out, I can initiate as many calls as I want from the GV web page Call button, even immediately after GVOut has crapped out.

Edit: This issue may have been due to GV growing pains. In any case the latest version of GVOut (version 1.1.5.1 as of this writing) is currently working very well.

doohickey · MagicJack User Joined: 08 Jul 2009 Posts: 41

az1324, is there any chance you would consider releasing the source code? I'm not sure how far I would get with it, I'm not really a Windows guy, but I would certainly use this opportunity to cut my teeth.

What I'm most interested in is making strictly a call initiator for the GV Call feature, as I use the dial plan method.

az1324 · Posted: Fri Sep 11, 2009 10:30 am Post subject:

Here is a small update for GVOut. I'm not even using it anymore in favor of SIPSorcery. Update adds a dial plan mode.

degarb · MagicJack Expert Joined: 04 Aug 2008 Posts: 92

latest version of gvout is crashing on startup on xp pro sp3.

I bought a papt2 from staples.com and not sure if unlocked or not or what that mean or firmware flash. I cannot find the docs on cd. So far after hours and hours only on page 6 reading of this thread. I only get pap2t to work with sipgate, but when I turn on outgoing proxy, like other user, it breaks. If I put outgoing as 192.168.0.10:5060 I can get incoming calls but I cannot dial out.

Now problem is there is no restore facotory default button I can see. Very confusing setup, as promised in reviews; Cisco like complexity for complexity sake. I don't see sipgate screeshots on sipgate site. Unsure of stun setting.

So, alot of questions.

Got sipsorcery account--the preferred way-- but clueless there where to start. They like complexity for complexity sake too.

doohickey · MagicJack User Joined: 08 Jul 2009 Posts: 41

degarb · MagicJack Expert Joined: 04 Aug 2008 Posts: 92

I rebooted and crashing stopped. I assume some remnant of old version was stopping up the port.. Is the newer version of gvout work better on pap2t?

I wasn't having luck other than incoming, but tried every combination I could think (thus need for factory restore)

I was only able to get sipsorcery to work once I was pointed to the url below.

http://www.mysipswitch.com/forum/viewtopic.php?t=1628&postdays=0&postorder=asc&start=10

doohickey · MagicJack User Joined: 08 Jul 2009 Posts: 41

synchron · Posted: Fri Sep 18, 2009 12:47 pm Post subject:

anant · Posted: Tue Sep 22, 2009 2:05 pm Post subject: Callcentric with GoogleVoice

Hi Folks:

I have signed up for Callcentric and I got a phone # 1777xxxyyyy. I am trying to add this phone to my GV accont. But GV not able to verify this callcentric phone #. Have anyone experienced this problem ?

anant

macman4hire · Posted: Tue Sep 22, 2009 3:09 pm Post subject:

The Callcentric 1777 number will not work with Google Voice at this time. You could however forward a Gizmo5 number that you have verified in Google Voice to your Callcentric if you have a limited amount of SIP account registrations available in your configuration. This can be done by going to Gizmo5 members login page and selecting the forward tab. Next in the forward box place the following 1777XXXXXXX@in.callcentric.com. Hope this helps.

anant

Thanks for your repy.

I have registered callcentric with SS and I have set up a Callcentric dial plan. I want to make outbound calls just like I currently do with gizmo/sipgate etc under SS w/o using computer.
Since I cannot add the callcentric telephone # to GV, like I did with gizmo, sipgate etc, I cannot make outbound calls using callcentric telephone. I realize Callcentric # also is another gizmo telephone in GV account..

mel2000 · MagicJack Contributor Joined: 31 May 2009 Posts: 67