magicJack and MagicJack Plus Support, Reviews, FAQs and Hacks

newwonder01 · magicJack Apprentice Joined: 02 Feb 2008 Posts: 21

Hi, are u able to call and receive using innomedia device, I am having problem of calling, immediately is going to busy tone.

Google · AdSense

nakamoniel · MagicJack Newbie Joined: 29 Dec 2008 Posts: 9

HI GUYS, my router is acting up really weired, i have my tomato on wr859g at 192.168.1.1 and linksys router (wrtp54g) at 192.168.15.1 both have dhcp enabled. now when i dont have sip info everything works flow less as far as having my wr850g in CLIENT MODE running MJPROXY and linksys as router, but as soon as i try to register sip ( either majicjack or sipgate) all hell breaks loose and router would keep rebooting over and over and over again. however it would go stable after few minutes/hours, would keep working for few days and drop out again. Is it a known issue? Any one had troubleshot it or know the solution?

RobbyG · magicJack Apprentice Joined: 26 Dec 2009 Posts: 17

Thanks noetic1 for the great guide. Was able to setup the proxy on my WRT54GL with Tomato yesterday and everything is working great! Razz

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

I am using Linksys WRT54G-TM and using Tomato 1.27. I have run into a prolem on step number 7. I entered "chmod mjproxy to 755" (no quotes) and it says it can not be found. I am at a loss here, because I have no knowledge of programming linux. It appears that the mjproxy is not loading in router.

Also it says to Telnet, but doesn't show clicking telnet. I thought telnet used port 23. I am stumped at this level. Any help from here would be appreciated.

Thanks,

Mike

twice · MagicJack Newbie Joined: 01 Jun 2008 Posts: 4

make sure u are in the jffs directory
and "chmod 755 mjproxy"

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

I think I see my mistake. In step 5, I uploaded to 192.168.1.1, but forgot to add /JFFS. I will try that when I go home and update my progress. Did I have to make a JFFS folder, or by enabling in router it is made automatically?

Thanks

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

I made it through to step 10, and this is the command that shows up in Putty.

/jffs/mjproxy 0.0.0.0 5070 proxy01.miami.talk4free.com 5070 MJpassword

In the tutorial it has same, except no jffs/ before mjproxyxxxxxxxx

I am not getting the line connected. Did I somehow load mj proxy in wrong directory?

Any ideas?

Thanks,

Mike

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

anyone?

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

Guys,

I got it working. I realized I had wrong setting in ATA . I had proxy setting set at 192.168.1.101. It should have been 192.168.1.1.

I appreciate all the help.

Thanks,

Mike

noetic1 · MagicJack Contributor Joined: 14 Oct 2008 Posts: 65

Mike - Glad you were able to work through the settings.

I've been using this setup since my original post and it has been running solid. I'm sure you won't be disappointed.

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

I am back. Everything was working great until I had to disconnect my router,ATA etc.. today to paint my computer room. I hooked everything back up and it is not working.

I telnet and used the top command, and I do not see MJ proxy command. I then started fresh with the instructions, and once again when I use top command, I don't see MJ proxy in list.

Am I missing something?

Thanks,

Mike

noetic1 · MagicJack Contributor Joined: 14 Oct 2008 Posts: 65

That is strange. I actually powered down my modem, router (running Tomato/MJMD5), PAP2NA, 1GB switch and NAS because my NAS was acting up and I couldn't access files in it.

I powered everything back up and verified I had a dial tone on my home phone and that I could ring my cell phone.

I recommend unplugging your router, waiting 30 seconds and then plugging it back in to see if it kicks off the MJMD5 command. If not, then just telnet to your router and manually enter the command and run the 'top' command to verify that mjproxy is running.

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

When you say manually enter command, could you tell me what to enter.

Thanks,

Mike

noetic1 · MagicJack Contributor Joined: 14 Oct 2008 Posts: 65

command = mjproxy 0.0.0.0 5070 proxy01.chicago.talk4free.com 5070 your_MJ_password (with your correct proxy and password)

Did you verify that you successfully completed step 8 where it says to 8. Put command line in Tomato Administration/Scripts/Init tab ?

This step automatically executes that command after the specified wait/sleep time when you reboot your router.

Don't forget that it might take 3-5 minutes before your ATA changes to 'Online' status.

mjc8870 · MagicJack Contributor Joined: 12 Nov 2008 Posts: 64

This is what I have in my scripts - sleep 30
/jffs/mjproxy 0.0.0.0 5070 proxy01.miami.talk4free.com 5070 my password

Do I need that JFFS. That is what I had previously when it was working.

I appreciate your help. It is probably something simple, most likely operator error.